Self Leveling Laser Level

8 lines 9 points laser level (4V4H1D)self leveling rotary laser level

8 lines 9 points laser level (4V4H1D)self leveling rotary laser level
8 lines 9 points laser level (4V4H1D)self leveling rotary laser level
8 lines 9 points laser level (4V4H1D)self leveling rotary laser level
8 lines 9 points laser level (4V4H1D)self leveling rotary laser level
8 lines 9 points laser level (4V4H1D)self leveling rotary laser level
8 lines 9 points laser level (4V4H1D)self leveling rotary laser level
8 lines 9 points laser level (4V4H1D)self leveling rotary laser level
8 lines 9 points laser level (4V4H1D)self leveling rotary laser level

8 lines 9 points laser level (4V4H1D)self leveling rotary laser level

Automatic leveling range: approximately ± 2.5 °. Line Laser wavelength: Next-to-point 1 × 650nm. Working distance: indoor working radius of 10m. Using detectors: working radius of not less than 50m.

Laser power: 1mw or less (safety standards 2). Continuous working time: about 8 hours. Makaad 8 lines laser level is widely used in the field of construction, decoration and equipment installation. It combines the original spirit level, theodolite, crossed function. It will be an accurate projection of the laser line alignment 7m ± 1mm work on the work object, make the construction process more convenient, more time and more effort, while capable of high accuracy to ensure construction quality.

1 , before first use , unscrew the battery cover counterclockwise fixed knob , remove the battery cover and three rechargeable batteries or alkaline batteries under " - , +" sign into the battery holder , then replace the battery cover and tighten the battery mounting buttons. 2 , the instrument is placed on the ground or on a tripod, and placed on a tripod , the need to manually turn the instrument on the center of the tripod center nut or screw fastening. When necessary, unscrew the three adjustable feet helix. 3 , adjust the three leveling screws, circular level bubble into the black circle.

4 , the power switch to the "ON" position , power , and automatic discharge compensator self-locking state, so that the level of compensation can be automatically corrected. Turn the power switch to "OFF" position , turn off the power while the compensation is automatic self-locking state.

Instrument has four operating modes : H/VH/2VH/4VH (or 3VH). Power, the operating mode of the instrument is H , horizontal laser light , if necessary, by function can work mode selection switch.

5 , on the location of the instrument on the ground aimed at the target point , then rotate the upper part of the instrument , making it probably the vertical line at the target , and finally turn the trim knob, so that the vertical line at the target accurately. 6 , at work, for some reason, the instrument tilt caused by more than ± flashes to indicate an alarm , then adjust the three leveling screws so that the original vial blisters into the black circle. 1 x 8 lines 3 points Laser Level (included Li battery). 1 x EU Power supply(Input:AC110-240V).

The item "8 lines 9 points laser level (4V4H1D)self leveling rotary laser level" is in sale since Thursday, November 05, 2015. This item is in the category "Home & Garden\Tools\Measuring & Layout Tools\Laser Measuring Tools". The seller is "bruceni123" and is located in Shanghai. This item can be shipped worldwide.

  • Type: Cross-Line Laser Level
  • Brand: HC
  • MPN: Does Not Apply


8 lines 9 points laser level (4V4H1D)self leveling rotary laser level